Embedded

Laszlo Agocs

Graphics improvements for Embedded Linux in Qt 5.7

Published Tuesday June 7th, 2016 | 6 Comments on Graphics improvements for Embedded Linux in Qt 5.7
Posted in Dev Loop, Embedded, Graphics, News, OpenGL, QPA, Qt, Wayland

As is the tradition around Qt releases, it is now time to take a look at what is new on the Embedded Linux graphics front in Qt 5.7. NVIDIA DRIVE CX The linux-drive-cx-g++ device spec introduces support for the NVIDIA DRIVE CX platform. This is especially interesting for the automotive world and is one of […]

Read More
Gatis Paeglis

Over-the-Air Updates, Part 1: Introduction

Published Tuesday May 31st, 2016 | Comments Off on Over-the-Air Updates, Part 1: Introduction
Posted in Biz Circuit & Dev Loop, Embedded

The Qt for Device Creation offering has been successful at bringing many new and exciting products to the market by significantly reducing time-to-market with its pre-configured software stack and toolchains for rapid UI development. We would like to take this a step further by providing an opt-in feature for Over-the-Air (OTA) system updates.

Read More
Risto Avila

Fast-Booting Qt Devices, Part 3: Optimizing System Image

Published Wednesday May 25th, 2016 | 14 Comments on Fast-Booting Qt Devices, Part 3: Optimizing System Image
Posted in Automotive, Biz Circuit & Dev Loop, Boot time, Embedded

It is now time for the third part of the fast-boot blog post series. In the first post we showed a cluster demo booting in 1.56 seconds, in the second post we opened up how the Qt application was optimized. Here, we will concentrate on the optimization of boot loader and kernel for NXP i.MX6 SABRE development board […]

Read More
Iris Yamashita

Qt @ NXP FTF 2016

Published Friday May 13th, 2016 | 2 Comments on Qt @ NXP FTF 2016
Posted in Biz Circuit, Community, efficiency, Embedded, Events, News, Performance

The Qt Company is a Silver Sponsor with Adeneo Embedded at NXP FTF Technology Forum 2016 where inspiration, training, ecosystem and expertise you need will be provided to boldly face the challenges and opportunities from new markets and ever-changing technologies.    NXP FTF Technology Forum 2016 May 16-19, 2016 JW Hotel, Austin Register today    The Qt Company, Adeneo […]

Read More
Risto Avila

Fast-Booting Qt Devices, Part 2: Optimizing Qt Application

Published Wednesday April 27th, 2016 | 13 Comments on Fast-Booting Qt Devices, Part 2: Optimizing Qt Application
Posted in Automotive, Biz Circuit & Dev Loop, Boot time, Embedded

Welcome back to the fast-boot blog post series! Last week we covered the fast-boot demo that showed you a video of an i.MX6 board booting under 2 seconds. In this blog post we will cover how the Qt QML cluster application was optimized. The original demo shown in Qt World Summit 2015 was designed in PC […]

Read More
Tuukka Turunen

Creating Certified Systems with Qt

Published Monday April 25th, 2016 | Comments Off on Creating Certified Systems with Qt
Posted in Automotive, Biz Circuit, Embedded, RTOS

When there is a need to use Qt as part of a system requiring functional safety certification, it is typically best to analyze if the safety critical functionality can be separated. This approach allows the safety critical functionality to be implemented without the need to certify the complete software stack of the system. In my […]

Read More
Risto Avila

Fast-Booting Qt Devices, Part 1: Automotive Instrument Cluster

Published Wednesday April 20th, 2016 | 4 Comments on Fast-Booting Qt Devices, Part 1: Automotive Instrument Cluster
Posted in Automotive, Biz Circuit & Dev Loop, Boot time, Embedded

When creating embedded devices, one crucial part of the user experience is also the boot-up time of the system. In many industries, such as Automotive, there are also hard requirements for the boot-up time. We get a lot of questions like “How quickly can devices built with Qt start?”,  “Can you boot up a system […]

Read More
Pejman Kalkhoran, Boundary Devices [Qt Technology Partner]

Three Steps to a Successful Embedded Product

Published Thursday March 31st, 2016 | 3 Comments on Three Steps to a Successful Embedded Product
Posted in Biz Circuit, Embedded

Developing an embedded product requires three main steps: selection of the proper hardware platform, operating system selection/setup, and User Interface (UI) development.  All three of these steps are very closely tied together and have a significant impact on time-to-market, project costs, and the overall quality of the product.  It is critical to select the proper […]

Read More
David Schulz

Qt for Device Creation on Windows Host

Published Wednesday March 16th, 2016 | Comments Off on Qt for Device Creation on Windows Host
Posted in Dev Loop, Embedded, Qt, Windows

One of the new and a quite remarkable items we’re introducing with Qt 5.6 is the possibility to use Windows host computer for embedded Linux development and deployment. The aim of the feature is to make embedded development workflow as seamless as possible regardless of the host OS. So now Windows users can use their […]

Read More
Tuukka Turunen

Creating Digital Instrument Clusters with Qt

Published Thursday March 3rd, 2016 | 3 Comments on Creating Digital Instrument Clusters with Qt
Posted in Automotive, Biz Circuit & Dev Loop, Embedded, Embedded World

Qt is widely used in automotive infotainment systems with a number of OS and platform configurations. Some of the car manufacturers have already introduced Qt also in their digital instrument clusters. We believe there will many more in the coming years. Therefore, we have started focused research and development during last year to make cluster […]

Read More
Get started today with Qt Download now